Leistritz Xuan mill! Turning of and rather than!

Leistritz produces technical limited company to regard Leistritz as the one part of the group, the economic production that is appearance of whorl of inside and outside only offers Xuan mill machine tool, keyway to machine machine tool and hard alloy cutting tool. Pass machine tool and cutting tool the synergism of two respects, leistritz company already built substantial professional knowledge. According to the experience that this two respects accumulate for years, the Leistritz that help strength produces technical limited company to develop oneself technology ceaselessly, offer machine tool of the most high quality one continuous line and cutting tool solution to the client. The core competition ability of limited company of Leistritz production technology is the development of custom-built solution and flow and production. Be accumulated through old experience and reach the partner's clasp with the client, leistritz ensures develop first-rate solution for every project. Leistritz is compared for big helix angle and old long way (L/D>25) inside thread machining is offerred inside Xuan mill solution. Machine tool of its LWN120 IW serves as brand-new product of research and development, design for the whorl inside treatment technically, the fastener nut that if all sorts of nut of nut of ball guide screw, echelon guide screw, cars apply nut and oil industry,gets a pipe. Of Leistritz inside the means of the whorl inside treatment of Xuan mill machine tool is different from traditional turning. Cutting tool rotates in the high speed in workpiece aperture, produced cutting rate, can avoid to accumulate the generation of bits tumour. LWN120 IW can finish integral thread machining, do not need to have prior operation to workpiece. Workpiece can undertake already wet treatment also can do type treatment. Treatment grows aperture workpiece (L/D>25) when, cutting tool needs to be sent workpiece aperture inside, reason uses oil to serve as refrigerant. While cutting tool is rotating, move on axial, cutting tool moves on fore-and-aft direction as whorl. Because the big helix angle in the whorl inside this becomes an issue of treatment no longer. CNC Milling