The HPT razor blade of high-powered cutting -- faster, more perfect turning
- Time:
- Click:137
8mm ～ 1.
2mm, arrive again 1.
6mm. 90 time evening, turning engineer draws lessons from the experience that milling travels together, used a kind of Xiu Guangren technology that used 25 years. This one revolutionary thought makes turning workpiece is in maintain the circumstance with exterior changeless quality to fall, twice raises turning feed rate to become a possibility. Times acute is in especially the HPT that Xiu Guangren develops on the foundation of bit is high-powered turning razor blade, its turning function rises 25% , shortened at the same time in the exterior quality that acquires ideal handling time. And in feed same situation falls, exterior quality rises than Xiu Guangren razor blade 50% . In addition, HPT technology applies to the negative horn cutting of small diameter workpiece likewise. HPT technology is efficiency of a kind of production can improve the innovatory technology of 3 times: Feed leads 3 times be common ISO razor blade; Be in and quality of the surface below the situation with same rate of feed of ISO razor blade rises 75% ; Because HPT razor blade repairs Guang Ren to be mixed completely feed direction (workpiece axes) parallel, advocate cutting blade obstruction is reduced, because this is when turning negative horn (be like CNMG and WNMG) , although process small diameter work as much applicable. And have only below the circumstance normally horny razor blade (the treatment that if CCMT) is OK,uses product of Yu Xiaozhi diameter. HPT razor blade uses Durotec technology at the same time medicinal powder hot surface structure, have the Steeltec LC215K that applies to steel treatment already, with general LC225C coating, also have the Casttec LC620H coat that applies to cast treatment. CNC Milling